Baldwin 6802.102.R Mortise Lock-Lever 2" Backset

  • $150.00
    Unit price per 
Shipping calculated at checkout.

Only 2 left!

Baldwin 6802.102.R Mortise Lock-Lever 2" Backset

Product Summary

 For Lever x Lever
Mortise Lock comes with (6340) ASA Strike as standard.
Latch bolt by knob from either side, except when outside knob is locked by stop in front, then latch bolt by key outside and knob inside.
Deadbolt by key outside and turn piece inside. Continuous turn of key outside retracts both latch and deadbolt.
1 in. throw Deadbolt with saw-proof inserts is standard equipment. Not available for 2 in. or smaller backsets.

FSE: ANSI Series: 1000-F08/F10
NOTE: For single and double cylinder applications.

1-1/2 in. and 2 in. backset comes with 1 in front. Non-standard 1-1/4 in. fronts are available upon request for an additional upcharge.
NOTE: Baldwin recommends the usage of 2-3/4 in. backset locks for doors thicker than 2 in. or doors 8ft or taller.
WARNING: DO NOT USE Lever Strength mortise locks with knobs. They only turn one way and have a stiff turning action suitable for levers.
Mortise Locks are NOT available in Distressed finishes. Non-distressed equivalents 402=102, 452=152.
Specify finish when ordering.

Entrance and Apartment

  • Latch bolt by lever from either side, except when outside lever is locked by stop in front; then latch bolt by key outside and lever inside.
  • Deadbolt by key outside and turn piece inside. Continuous turn of key outside retracts both latch and Deadbolt.
  • Sold with faceplate and strike